Transfer Files From Phone to PC Without Internet or a Cable
You can transfer files from a phone to a PC without internet or a cable, as long as both are on the same network. Your Wi-Fi router still connects them when the broadband is down, and with no router at all, turn on the phone’s hotspot and join it from the computer. Then send with Quick Share (Android to Windows), LocalSend (an app on both ends) or Dropple, the app I make. Bluetooth works too for a few small files, except from an iPhone.
The internet is down, or you’re somewhere with no signal worth using, or you just don’t want a 2 GB video going up to a cloud drive and back down again to travel half a metre. You have no cable, or the one you have only charges. This post covers each of those ways, for Android and iPhone, Windows and Mac, what each one actually needs, and the Windows setting that stops a phone finding the PC.
You don’t need the internet, just a network
This is the part most people miss. When your phone and computer are on the same Wi-Fi, traffic between them goes through the router and never leaves your home. The router’s internet connection is only for reaching things outside. If the broadband is down but the router is on, the two devices can still see each other, and anything that sends files over the local network keeps working.
You don’t even need a router. A phone’s hotspot is a small Wi-Fi network of its own. Turn it on, join it from the computer, and the two are on one network. Files you send between them go directly from one to the other, not out over mobile data.
One warning on the hotspot route: while the computer is joined to it, the computer will use your mobile data for everything else it does, like updates, cloud sync or a browser tab refreshing in the background. Pause those if your data plan is small.
Turning the hotspot on:
- iPhone: Apple’s Personal Hotspot guide says to open Settings > Personal Hotspot and turn on Allow Others to Join, then pick the iPhone from the Mac’s or PC’s Wi-Fi list.
- Android: Google’s hotspot help page says to pull down Quick Settings, touch and hold Hotspot, and switch on Wi-Fi hotspot. The exact labels vary by phone maker.
On Windows, set the network to Private
Windows treats every network as one of two kinds. Microsoft’s network settings page describes them plainly. On a Public network, “your PC will be hidden from other devices on the network”. On a Private network, it’s discoverable, and Microsoft adds that you should know and trust the people and devices on it.
Anything that lets your phone reach your PC over Wi-Fi needs Private. To change it, go to Settings > Network & internet, select Wi-Fi, select the network you’re connected to, and under Network profile type choose Private network. Do this for your home Wi-Fi and for your phone’s hotspot, which Windows sees as just another network. Leave café and airport Wi-Fi on Public.
Some networks won’t work whatever you do. Guest Wi-Fi and a lot of office networks turn on what’s called client or AP isolation, which stops devices on the network talking to each other. The LocalSend README names this as a common cause of devices not finding each other, and notes that guest networks often have it on. If that’s where you are, use your phone’s hotspot instead.
Bluetooth: slow, but already there
Bluetooth needs no network at all, and both Windows and the Mac can receive files over it.
- Windows: pair the phone first. Then, per Microsoft’s Bluetooth file transfer page, go to Settings > Bluetooth & devices > Devices, choose Send or receive files via Bluetooth under Related settings, select Receive files, and then send from the phone. Windows asks where to save the file at the end. If the option isn’t there, Microsoft says the PC may have no Bluetooth adapter or its driver isn’t installed.
- Mac: Apple’s Bluetooth Sharing guide has you turn on Bluetooth Sharing under System Settings > General > Sharing. Received files go to Downloads by default.
- Android sends with the share button, choosing Bluetooth as the target.
Two limits. It’s slow, fine for a few photos or a PDF and painful for video. And it doesn’t work from an iPhone. Microsoft’s page says the sending device can be iOS, but the iPhone’s share sheet has no option to send a file over Bluetooth. Apple uses Bluetooth on the iPhone for accessories and for AirDrop, which only talks to Apple devices.
Wi-Fi Direct: the tech inside other apps
Wi-Fi Direct lets two devices connect over Wi-Fi with no router in between. Android’s developer docs describe it as a way to connect “without an intermediate access point”. It’s real and it’s fast, but it isn’t something you use on its own. There’s no general Wi-Fi Direct file receiver in Windows settings or on a Mac. You get it when an app uses it for you, which is where Quick Share comes in.
Quick Share between Android and Windows
Google’s Quick Share for Windows app sends files both ways between an Android phone and a Windows PC. Quick Share is already built into Android 6 and later, so only the PC needs the app, and Google’s page says it needs a 64-bit version of Windows 10 or later.
On the network side, Google’s help article asks for Bluetooth on both devices, Wi-Fi or Ethernet, the same network and the devices within 5 metres of each other. It also suggests connecting the PC to your phone’s hotspot when an office network blocks sharing, which is the same trick as above. It says “to access all options” you should use the Windows app with your Google Account, so signing in is how you get the private visibility settings like Your devices.
Its limits: it’s Android and Windows only. There’s no Quick Share app for the Mac, and iPhones aren’t part of it. And you have to install it while you still have internet.
Microsoft’s own Phone Link is worth a look if you already use it, but it’s not built for this. Its requirements page says an Android phone and the PC must be on the same Wi-Fi network, and on iPhone it’s mostly messages, calls and notifications; sending files from an iPhone is newer and needs Windows 11.
LocalSend: free, open source, an app on both ends
LocalSend is an open-source app that sends files between devices on the same network with no internet and no servers in between. It runs on Windows, macOS, Linux, Android and iOS, so it covers every pairing in this post. It’s a good choice if you move files often and don’t mind installing an app on the phone as well as the computer. As with any app, install it on both before you’re offline.
Where Dropple fits
Dropple is a free app for macOS 12 or later and Windows 10 and 11. The difference from LocalSend and Quick Share is that nothing gets installed on the phone. The computer runs a small web server on your local network and shows a QR code. You scan it with the phone’s camera, a page opens in the phone’s browser, and that’s the whole connection. No phone app, no account.
Because it’s all local, it works on a Wi-Fi network with no internet at all, as long as the phone and computer are on the same network. It works over your phone’s hotspot too: turn the hotspot on, join it from the computer, and scan the QR code. The files go straight between the two devices.
What it does:
- Phone to computer: files, photos, links and text, from Android or iPhone. They land in Downloads/Dropple.
- Computer to phone: drag a file onto the window, or onto the MacBook notch (on Windows, a bar at the top of the screen). Folders arrive on the phone as a zip.
And the limits, plainly:
- The computer needs Dropple installed, so get it before you’re offline.
- Same network only. Guest or office Wi-Fi with client isolation blocks it, like everything else here. Use the hotspot.
- On Windows, allow Dropple on Private networks when the firewall asks, and set the Wi-Fi or hotspot to Private as described above.
Dropple is free, and Pro is a one-time $7 at launch, $9 later. It’s on the Dropple page.
If you do have a cable after all
For completeness: a USB cable that carries data still works without internet. On Windows, Microsoft’s photo import page has you plug in and unlock the phone, then use Import in the Photos app. An iPhone asks you to Trust This Computer first, and an Android phone may need its USB setting changed from charging to file or photo transfer. Microsoft also notes that iPhone photos stored only in iCloud won’t import this way. On a Mac, an iPhone shows up in Photos and Finder, but an Android phone needs a separate app.
Which should you use?
- Android to Windows, now and then: Quick Share, signed in.
- Anything to a Mac or PC, a few small files: Bluetooth, except from an iPhone.
- Both ends happy to run an app, often: LocalSend.
- iPhone or Android, Mac or PC, nothing on the phone: Dropple, over your Wi-Fi or your phone’s hotspot.
- Whatever you use on Windows: set the network to Private, or the phone won’t find the PC.